Dragon - UV DTF Wrap

• UV DTF material which stands for ultraviolet direct to film printing
• Designed for 16oz can cups (libbey)
• Waterproof
• Can be placed on glass, metal, plastic, wood, acrylic and more; basically any hard surface
• Mot made for fabric
• Average width 9.45" but may vary some depending on wrap
• Average height 4.4" but may vary some depending on wrap

Application instructions:

1. Clean the surface of your product thoroughly. You can use alcohol to do so.
2. Peel the backing off of the transfer.
3. Place the transfer on the cup ensuring the design is positioned just as you would like it. This transfer is PERMANENT and once it touches the item you are putting it on, it is almost impossible to remove.
4. Press the transfer down, working from the center outward, getting all the bubbles out. I recommend using a squeegee to help with this process.
5. Once your design is evenly pressed on your product, slowly remove the clear film (transfer tape) from the transfer. I recommend going very slow and removing it at an angle for best results. Take your time.
6. Once the clear film is removed, your product is complete!! Enjoy💜

These finished items are HAND WASH ONLY! Do NOT put in dishwasher, microwave or left soaking in water. 

***JCG Wholesale is not responsible for application mishaps, misuse or damage to the transfer during the application process.